RSS
PrintPressure and Combined Pressure & Temperature Sensors
Kavlico manufactures a selection of pressure and combined pressure and temperature sensors for such aerospace applications as turbine inlet pressure, hydraulic system health monitoring, and high-pressure hydraulic actuator measurements. These high reliability sensors are designed specifically for rigorous flight critical applications. Hermetically sealed, all-welded housings protect against corrosion and harsh environmental contamination as well as external material damage.
Sensors can be supplied in gage, absolute, sealed gage, and differential pressures. They can be specified with an isolation diaphragm, environmentally protected sense element, or in a wet/wet configuration.
Application specific, semi-custom, and full custom sensor configurations can be adapted from our flexible manufacturing design process.
Typical applications include:
- Turbine inlet pressure
- Hydraulic system health monitoring
- high pressure hydraulic actuator measurements
To find out more about Kavlico sensor solutions, contact us at position.sensors@kavlico.com
| Pressure Ranges | Up to 30,000 PSI or (2,100 Bar) |
| Housing Material | All-Welded 316 SS |
| Supply Voltage | 10 V for Non-Amplified Output 5 V to 36V |
| Output Amplified | (0.5 to 4.5 vdc) |
| Non-Amplified | (0 to 100 mV) for ranges up to 6,000 PSI (0 to 50mV) for ranges 10,000 to 30,000 PSI |
| Operating Temp | -65 to +180° C; +300° C optional |
| Technology | Piezo Resistive (PRT), Oil-Filled PRT, and Isolated Thin Film |
| MTBF | 300,000 Hours Typical |
| Electrical Interconnect | MIL Connector or Flying Leeds |
| Pressure Port | Interface Custom as Required |
| DO 160 Qualified | Yes |
